PCB Repair Epoxy Resin/Hardner
Resin/Hardner, Single Use.
2 gms with divider Quantity 10 packets.
This epoxy is designed to withstand the chemicals, heat and can adhere to materials common in PCB assembly. It has been used since 1998 and can be used in a variety of applications including but not limited to pad and trace repair, solder mask repair, baseboard material repair as well as numerous others.
The mix ratio is already taken care of for you in the pre-mixed bags and therefore is easy to remember and easy to mix. It is a 3:1 ratio mix.
Colorants can be added in order to match the board mask color.
Specifications:
PCB Repair Use: Used for bonding replacement pads and traces, repairing broken corners, repairing mask (adding colorant)
Shelf life: 6 months minimum
Color: Clear
Cure: Room Temperature/Heat
Cure Time: 3 days at 77°F/25°C; 2 hrs at 140°F/60°C;1 hour at 180°F/82°C
Dielectric Strength: 1,080 V/mil
Operating Temp Range: -67°F (-55C) to 275°F (135°C)
Elongation: 2.4%
Hardness: 85 D
Coefficient of Expansion:6 x 105 cm/cm/°C
Mix Ratio: 2.1:1 by volume; 100:33 by weight-pre-measured pouch has correct ratio
Shear Strength: 1,850 to 3,000 @ 77°F/25°C
Working Time:60min @ 77°F/25 °C
This can be used for replacement of Circuit Bond Epoxy.
